Lead Work in Shap

Lead Work in Shap

Shap customers looking for lead work turn to Sweep It Cumbria. Lead flashing seals the junction between your chimney stack and the roof covering. In Cumbria's wet climate, failed or cracked lead is one of the primary routes for rainwater into a property — staining ceilings, soaking roof timbers, and eventually tracking down to the chimney breast below. We repair and replace lead soakers, stepped flashings, and back-gutters at chimney stacks, using the correct grade of lead appropriately dressed and bonded to shed water clear. All lead is laid with the correct fall and overlap for long-term weathertightness in a high-rainfall environment. Shap sits on the high fell plateau of the A6 between Kendal and Penrith — at nearly 900 feet, it sees some of the harshest winter conditions on any main road in England. Properties here are heavily reliant on solid-fuel heating through the winter, and annual stove servicing and chimney sweeping are a practical necessity rather than an option.

Why Choose Sweep It Cumbria in Shap?

Sweep It Cumbria brings the same standard of lead work to every property in Shap, Cumbria. Lead flashing repair and renewal at chimney stack junctions — preventing the water ingress that causes staining and structural damage in Cumbria's wet climate.

Key Benefits

• ✓Lead soaker, stepped flashing, and back-gutter repair and renewal
• ✓Correct lead grade for the application — properly dressed and bonded
• ✓Prevents water ingress at the chimney-to-roof junction
• ✓Inspection of existing lead condition included before any work is priced
• ✓Fully insured