Lead Work in Skelton
Lead flashing repair and renewal at chimney stack junctions — preventing the water ingress that causes staining and structural damage in Cumbria's wet climate.
Lead Work in Skelton
Skelton customers looking for lead work turn to Sweep It Cumbria. Lead flashing seals the junction between your chimney stack and the roof covering. In Cumbria's wet climate, failed or cracked lead is one of the primary routes for rainwater into a property — staining ceilings, soaking roof timbers, and eventually tracking down to the chimney breast below. We repair and replace lead soakers, stepped flashings, and back-gutters at chimney stacks, using the correct grade of lead appropriately dressed and bonded to shed water clear. All lead is laid with the correct fall and overlap for long-term weathertightness in a high-rainfall environment. Skelton is a quiet Eden Valley village north-west of Penrith, with a mix of older stone cottages and outlying farms. Solid-fuel ranges and wood-burning stoves are common heating fixtures here, and we cover Skelton as part of our regular Penrith-area round.
Why Choose Sweep It Cumbria in Skelton?
Sweep It Cumbria brings the same standard of lead work to every property in Skelton, Cumbria. Lead flashing repair and renewal at chimney stack junctions — preventing the water ingress that causes staining and structural damage in Cumbria's wet climate.
Key Benefits
- ✓Lead soaker, stepped flashing, and back-gutter repair and renewal
- ✓Correct lead grade for the application — properly dressed and bonded
- ✓Prevents water ingress at the chimney-to-roof junction
- ✓Inspection of existing lead condition included before any work is priced
- ✓Fully insured
Free Survey in Skelton
Book a Free SurveyCall 07738 464850Also serving nearby: Penrith, Dacre, Greystoke
Lead Work in Skelton — FAQ
Typical signs are a damp patch or staining on the ceiling near the chimney breast inside the property, visible lifting or cracking of the lead at the chimney-to-roof junction when viewed from outside, or bubbling and staining on wallpaper around the chimney breast.
Grade 4 lead is standard for soakers and stepped flashings at most chimney-to-roof joints. Grade 5 lead is used for larger horizontal surfaces such as back-gutters behind a chimney. We use the correct grade for each application to ensure longevity.
Lead Work in Nearby Areas
Ready for Your Lead Work in Skelton?
Book your free no-obligation survey in Skelton today.
